2 more for your team

[chak22]

I just added my 2 computers to your team , #1 2100XP@2315 mhz And #2 1200 T-bird @1333mhz hopefully I can help you guys out and move up

[roy]

Thanks, we needed it!

[GNXtreme]

Right on chak22 welcome to the team and welcome to PCStats!!!<BR>we are looking forward to hearing all about your overclocking...sounds like you know what the hell you are doing...you should fit right in here.

[TranceJunkieXL]

Nice OC's chak22! Maybe with your help we will break 49 and stay there this time!<img src="i/expressions/face-icon-small-happy.gif" border="0">

[chak22]

Thanks for the warm welcome!! Glad to be part of the team . All though I am sure there are people here that know alot more about 'puters than me hopefully my $.02 will be able to help ....

[GNXtreme]

chak22 how well does that vantec 6035d keep you cpu cool?&nbsp; I am just wondering 'cause I am looking for a better heatsink for my xp1700 tbred a (AIRGA) that is sitting on my MSI K7N2 board...

[chak22]

GNX, they don't make the 6035D anymore I think it has been replaced with the 6040D (these are both all copper)which is a little bigger in size but they still have the 6800rpm delta fan ,my rig runs at 39 deg C at full load while running F@H 24/7,the only bad part is the fan is loud (doesn't really bother me ),I personally would suggest a SLK 800 or 900 or the Swiftech MCX462+ as you can use 80mm on these or a 92 mm fan on the SLK900 if noise is an issue ,the slk 900 is my next buy and the 6035D will go to my #2 rig

[BAM!]

i can vouch on the slk800 especially combine with a smartfan II <img src="i/expressions/face-icon-small-smile.gif" border="0"> quiet as hell too>... can't hear a thing at 3000 RPM<img src="i/expressions/face-icon-small-smile.gif" border="0"> .. nothing else can beat that !!! <img src="i/expressions/face-icon-small-happy.gif" border="0">. my current 1700+ JIUHB is at 2.25Ghz @ 1.75vcore. i am getting a unlocking kit to unlock the voltage on my chip so i can access up to 1.85 Vcore to clock it even higher.. hope i don't fcuk up the process <img src="i/expressions/face-icon-small-smile.gif" border="0"> . wish me luck <img src="i/expressions/face-icon-small-smile.gif" border="0">

[TranceJunkieXL]

Luck HowardBAM!<img src="i/expressions/face-icon-small-wink.gif" border="0"><img src="i/expressions/face-icon-small-smile.gif" border="0">