NF7-S & XP2100(AIUHB)

[GNXtreme]

Ok, so far I have gotten 1.86GHz and it is rock solid stable!

[BAM!]

in the words of Colin.... keep going !!! <img src="i/expressions/face-icon-small-happy.gif" border="0">

[GNXtreme]

I am at 1.90GHz right now...going up more soon.

[BAM!]

if i don't see 2.17 don't talk to me !!! <img src="i/expressions/face-icon-small-shocked.gif" border="0"> <img src="i/expressions/face-icon-small-happy.gif" border="0"> <img src="i/expressions/face-icon-small-happy.gif" border="0">

[GNXtreme]

Ok BAM!&nbsp; I got 2.23GHz (stable) with a vcore of 1.8...I ran prime95 for about an hour and it did fine.&nbsp; CPU temp is getting a little high at 50'C but I can deal with it for now.

[BAM!]

very nice job man!!! <img src="i/expressions/face-icon-small-happy.gif" border="0">... good work..! .. that's what i wanted to see <img src="i/expressions/face-icon-small-smile.gif" border="0"> <img src="i/expressions/face-icon-small-tongue.gif" border="0">

[Colin]

<img src="i/expressions/face-icon-small-happy.gif" border="0"> Damn sir not bad at all! <BR><BR>50 degrees is ok, I find that T-Bred's handle high temperatures much better then Palomino's... <BR><BR>Come on, I'd expect to see around 2.4 GHz out of you man! <img src="i/expressions/face-icon-small-wink.gif" border="0">

[Ginsu543]

GNXtreme,<BR><BR>What multiplier and FSB settings are you using to get 2.23GHz? Currently, I have my AIUHB 2100+ at 2.25GHz (13.5 x 166MHz) but I can't seem to get it any higher. What's nice is that the current OC is rock solid. One other configuration I got to work is 13 x 173MHz FSB, but that's again 2.25GHz. Right now, 2.25GHz seems to be the limit for my CPU.

[GNXtreme]

I am using the stock 13x multiplier and a fsb of 172....it says it is running at 2236MHz....widows says 2.23GHz

[BAM!]

COLIN!!!! i don't know where you're from <img src="i/expressions/face-icon-small-shocked.gif" border="0">(maybe from the planet that all hardwares are made equal) but from what i 've seen... most of the AIUHBs 2100+ can only do around 2.2 - 2.3 ghz top with around 1.85 vcore. only a few cases have achieved higher frequency. <img src="i/expressions/face-icon-small-sad.gif" border="0">

[DeanLowe]

It should be almost the same as the JIUHB that we have.

[Ginsu543]

I have the AIUHB core, and I maxed out at 13 x 173 MHz FSB = 2249 MHz (MBM5 reports 2257 MHz). I can't seem to get it any higher. Alternatively, I can also use 13.5 x 166 MHz = 2250 MHz. No other multiplier-FSB combinations seem to work with the setup I've got. Either the computer won't boot up at all, or I start having Windows problems (my registry was corrupted once, although it was quickly replaced with a working copy by scanreg.exe). I'm also using 1.85V core voltage. I would have to agree with Howard BAM!

[DeanLowe]

It might just be a heat problem.