Some overclocking goodness... ;)

[Colin]

Hey there guys. I thought you might appreciate this... <img src="i/expressions/face-icon-small-wink.gif" border="0"><BR><BR><img src="http://members.lycos.co.uk/csmo/Computer/P4_3.0C/cpu.gif"><BR><BR><img src="http://members.lycos.co.uk/csmo/Computer/P4_3.0C/multimedia.gif"><BR><BR><img src="http://members.lycos.co.uk/csmo/Computer/P4_3.0C/memory.gif"><BR><BR>Unfortunately the memory is running at 200 MHz cuz of the with the 5:4 divider. It's the crappy AOpen motherboard I'm using right now, wait till I do some hardcore benching with the Abit IS7-G. <img src="i/expressions/face-icon-small-happy.gif" border="0"><BR><BR>Lastly...<BR><BR><img src="http://members.lycos.co.uk/csmo/Computer/P4_3.0C/3dmark2001se.gif"><BR><BR>Not bad considering there is no videocard overclock. <img src="i/expressions/face-icon-small-wink.gif" border="0">

[Ginsu543]

Hey Colin,<BR><BR>Good to have you back!!! Haven't seen you post around here in a long time.

[NaSTy]

Hey nice work Colin... almost an extra 800mhz~<BR><BR>What do ya think I could push me AMD 2600+ too? It's only at 2.32ghz at the moment (28 deg C)<BR>I have no idea what the standed speed of a 2600+ is<BR>got me a KT4 Ulta mobo<BR><BR>EDIT: Oh yeah good to see ya <img src="i/expressions/face-icon-small-smile.gif" border="0"><BR><BR>

[Colin]

Nice to be back.<BR><BR>It has taken me about a month to catch up in for work missed the week I was off. I'm not completely out of the woods yet as I still have about 10 review items on the queue. Oh well, that's part of the job. <img src="i/expressions/face-icon-small-wink.gif" border="0"><BR><BR>On a side note now that I have a bit of free time I'm going to spend it iwht my bud's down here. <img src="i/expressions/face-icon-small-smile.gif" border="0"><BR><BR>NaSTy, I'd say you could do around 2.4 GHz with a good air cooled heatsink... Do you happen to know which version XP 2600 you have? Is it an AIUHB?

[Avid6eek]

Welcome back Colin! About time you show your face around here.

[NaSTy]

<img src="i/expressions/face-icon-small-sad.gif" border="0"> No she's a Thoroughbred... Think I always get the wrong one

[NaSTy]

dis is what it's at<BR><BR><img src="http://www.nasty.esmartweb.com/stats/amd.x"><BR><BR>I have no idea what I should be setting it at...

[Avid6eek]

<br><br><< <i>Do you happen to know which version XP 2600 you have? Is it an AIUHB? ~Colin<BR>No she's a Thoroughbred... Think I always get the wrong one ~Nasty</i> >><br><br> LMAO....an AIUHB is a T-Bred. Colin is refering the the stepping of the T-Bred. If you look at the actual processor it should be listed down by the "Made in ..." Label. What are the five letters there? That will give you an indication of when the processor was manufactured, and how fast you can expect it to get.

[NaSTy]

Oh Crap!! so i gota pull me computer apart again<BR>I found out that it's ment to operate at 2083mhz <img src="i/expressions/face-icon-small-smile.gif" border="0"> and has 333mhz FSB.. Dose that help? <img src="i/expressions/face-icon-small-blush.gif" border="0">

[Ginsu543]

Am I misinformed? I thought all T-breds operate at 266 MHz. Aren't Bartons the only ones that operate at 333 MHz?

[NaSTy]

you misinformed<BR><BR><img src="http://www.nasty.esmartweb.com/stats/333.x">

[Viper409]

I don't think it can get anymore obvious than that Ginsu!

[Ginsu543]

I stand better informed!!! <img src="i/expressions/face-icon-small-happy.gif" border="0">

[BAM!]

t-bred come in two standards. t-breds 2600+ and lower are 266 based while 2600+ and higher are 333 based. although, there are two differernt fsb modules for the 2600+. there is the 266 and 333. barton on the other hand come in 333 and 400 fsb.

[TranceJunkieXL]

Yeah! Welcome back stranger!<img src="i/expressions/face-icon-small-wink.gif" border="0"><BR>I can't wait to see that 3DMark after you OC the video card.<img src="i/expressions/face-icon-small-happy.gif" border="0">

[GNXtreme]

Welcome back!!!!&nbsp; Good to see you ain't dead....

[NaSTy]

<br><br><< <i>Good to see you ain't dead.... </i> >><br><br><BR>LOL.. <img src="i/expressions/face-icon-small-happy.gif" border="0"> Yeah always good to see you ain't dead