NEED URGENT HELP!!!!!

[filip69692000]

ok this is what happened, i went to overclock and then i restart the machine right and it wouldnt' post, i tried to clear the cmos jumper and nuttin happened, still wouldn't post, what do i do now??

[filip69692000]

ok nevermind, i did it again and i fixed it, it seems that i cannot overclock my computer at all, <BR><BR>VIA KT333 ultra 2 series MOBO<BR>athlon xp 1900+<BR>256 mb ddr crucial<BR>40 gig maxtor HD<BR><BR>i run my memory timings at 2-2-3-5 (i think)<BR><BR>my fsb is set at 133 and vcore is set at AUTO and ratio is set at AUTO, what can i do to this to maybe get to 1.7 ghz?

[Colin]

What type of cooling are you using on yoru processor filip69692000 and what PSU do you have?

[filip69692000]

i have stock cooling (i know, i know) and i have an enermax 300 watt psu

[TranceJunkieXL]

Also what rating is your Crucial (PCxxxx)?

[verT]

Also you mem:cpu ratio could be too high if you are going for a high FSB I never trust those auto settings (evil motherboard makers I tell you). try dropping the multiplier down and up your FSB to find out where your ram tops out then start upping the multiplier.

[Colin]

filip69692000 if you're on stock cooling I owuldn't try overclocking as your processor will overheat very easily. You're running a Palomino I believe and the stock HSF's that came with those processors back then were really bad! <img src="i/expressions/face-icon-small-sad.gif" border="0"><BR><BR>Also yea what rithemking and verT said! <img src="i/expressions/face-icon-small-wink.gif" border="0">

[filip69692000]

i have pc2100 one stick

[TranceJunkieXL]

Good luck, because that combination (Palomino, KT333, PC2100) could be very disappointing if you want to overclock.<img src="i/expressions/face-icon-small-sad.gif" border="0">

[filip69692000]

ok this is ridiculas, im still trying to overclock my stock rig, but nuttin, i can't even raise the fsb like 6 mhz higher or lower the multiplier, it wont post, no matter what i do, there must be something wrong, i can't overclock the slightest tid bit

[filip69692000]

ok well i did this, raised the vcore to 1.74 and 139 fsb, posts fine, but if i go to 133 fsb and lower the multiplier to 10, it doesnt wanna post, even though thats only 1,330 ghz, why is that?>

[DragonClaw]

As they told me if you have a Palomino you cant change the multiplier. You have to unlock the cpu in order to do that. Only thing you can change is the fsb. <BR><BR>http://www.cpuid.com/cpuz.php<BR><BR>Get cpu-z from ther and find out if it is a Palomino or not then they can help you further.

[filip69692000]

no it is a palomino i already did cpu-z, so yeah its def a palomino<BR>

[DragonClaw]

<br><br><< <i>As they told me if you have a Palomino you cant change the multiplier. You have to unlock the cpu in order to do that. Only thing you can change is the fsb. </i> >><br><br><BR><BR>So like I siad