NF7-S v2.0 and CPU Problem

[eNatural]

Hey guys,


Ive got a NF7-S v2.0 with a 3200+ w/ 400FSB, I installed the new proc in yesterday and Was playing fine for a few hours when an alarm on the board started to go crazy and beeping, so I checked the voltages and the +5VSB was low, so I figured that was it.... replaced the powersupply and it booted fine, but the sounds are still there.. when I check the CPU temp it says "-20C/-251F" uhh.. negative degrees? but its running fine and the block of the heatsink feels normal...

any help?

[Crax]

Have you flashed to the newest bios? Do you have some sort of crazy cooling? It sounds like your bios is jus buggy or something, but there may be more to it.

[eNatural]

Nope, I havn't changed anything as far as the bios goes in a long time... Like I said, i put a new heatsink on, and put the new 3200 in, and it worked fine for a couple hours.... then it just started beeping like crazy. Ive replaced the PSU so the 5VSB is fine, but its still going crazy, it boots into windows and it will run just fine, just beeps like no other....

[Crax]

Look in your manual at the beep codes and see if that can give you any idea of what's going on.