PDA

View Full Version : new ethernet driver


in54n3
02-02-05, 09:54 PM
can you use an ethernet driver other then the nvidia one for the nforce 2 boards?

stlouis1
02-02-05, 09:55 PM
aside from maybe a generic dos driver?

in54n3
02-02-05, 10:52 PM
no i thought i heard someone said they were using like a linksys driver or something

stlouis1
02-02-05, 10:57 PM
you could maybe try and force it, but i dont know of any other drivers that would work

Zefram
02-02-05, 11:49 PM
What board you're using again?
Check the Network PHY Controller (realtek, etc.) and then you can download directly from the manufacturer.............
State the board model and brand, we'll fork something out from the net :D

Rudegar
02-03-05, 09:57 AM
but trying to install a nic driver of another brand then the one on the motherboard would likely be as successfull as using an ati driver on your geforce video card ;)

Zefram
02-03-05, 10:39 AM
No, just find the drivers for the PHY network controller, normally it was made by other company....................... nVidia just integrated the driver into its system drivers................

Here (http://www.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=3244&CATEGORY_TYPE=MB&SITE=US). Notice it uses the Marvell 88E1111 Gigabit Phy at the network section. Just to prove my point :D
The same goes to all nVidia Northbriges............. the nForce...........

Rudegar
02-03-05, 10:54 AM
i believed that when nforce mobo's had dual nic one was in the nvidia chip
and one was just a chip on the mobo
but then i never had a nforce mobo

in54n3
02-04-05, 12:45 PM
i have the abit nf7-s if it helps...

Zefram
02-04-05, 06:11 PM
i have the abit nf7-s if it helps...
Here what i dig from the net:
Your NF7-s uses the RTL8201 Phyceivers (realtek 10/100 LAN), althrough not mentioned in Abit Spec (http://www2.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=NF7-S&fMTYPE=Socket%20A&pPRODINFO=Specifications), it is mentioned Here (http://www.lostcircuits.com/motherboard/abit_nf7-s/)

So, realtek 8201 phyceivers, unfortunately, i only manage to dig up the linux drivers for it, and realtek seems to be stop supporting them and only allows the pdf downloads............

So, to conclude it all, there is no other drivers for RTL8201, it seems you have no other option than to use the bundled drivers.............. :p

in54n3
02-04-05, 07:05 PM
Here what i dig from the net:
Your NF7-s uses the RTL8201 Phyceivers (realtek 10/100 LAN), althrough not mentioned in Abit Spec (http://www2.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=NF7-S&fMTYPE=Socket%20A&pPRODINFO=Specifications), it is mentioned Here (http://www.lostcircuits.com/motherboard/abit_nf7-s/)

So, realtek 8201 phyceivers, unfortunately, i only manage to dig up the linux drivers for it, and realtek seems to be stop supporting them and only allows the pdf downloads............

So, to conclude it all, there is no other drivers for RTL8201, it seems you have no other option than to use the bundled drivers.............. :p
fux0r! lol

its alrite, they just arent great lol