lockdown
05-26-05, 11:52 AM
Hi im having the same problem as the guy in the post below me after the first reboot I get a fatal error. I did the guide exactly like it told me. The only thing I can think of is that my raid is a little bit different and requires 2 drivers to be able to work correctly. Usually at the F6 portion of the windows installion when I stick my floppy in I get 2 (Required drivers) on the floppy I have to install. So I think maybe the guide switches a little for me. Let me post some of my info here and you can see if it look right.
My SATA/RAID is controlled by Nvidia nForce4 chipset. My mobo is the Asus A8N-SLI Deluxe if that helps to.
"THIS IS THE CODE I HAD TO MAKE AND PUT IN TO THE TXTSETUP.SIF"
[SourceDisksFiles]
nvraid.sys=1,,,,,,3_,4,1
nvatabus.sys=1,,,,,,3_,4,1
[HardwareIdsDatabase]
GenNvRaidDisk = "nvraid"
*_NVRAIDBUS = "nvraid"
PCI\VEN_10DE&DEV_008E = "nvatabus"
PCI\VEN_10DE&DEV_0085 = "nvatabus"
PCI\VEN_10DE&DEV_00D5 = "nvatabus"
PCI\VEN_10DE&DEV_00EE = "nvatabus"
PCI\VEN_10DE&DEV_00E3 = "nvatabus"
PCI\VEN_10DE&DEV_00E5 = "nvatabus"
PCI\VEN_10DE&DEV_0035 = "nvatabus"
PCI\VEN_10DE&DEV_0036 = "nvatabus"
PCI\VEN_10DE&DEV_003E = "nvatabus"
PCI\VEN_10DE&DEV_0053 = "nvatabus"
PCI\VEN_10DE&DEV_0054 = "nvatabus"
PCI\VEN_10DE&DEV_0055 = "nvatabus"
[SCSI.load]
RAIDCLASS = nvraid.sys, 4
BUSDRV = nvatabus.sys, 4
[scsi]
RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)"
BUSDRV = "NVIDIA NForce Storage Controller (required)"
HERE IS MY TXTSETUP.OEM for my raid drivers
;
; format for txtsetup.oem.
;
; Follow this format for non-PNP adapters ISA
;
; Follow the txtsetup.oem in initio for PNP adapters like PCI and ISAPNP
;
; Txtsetup.oem is a generic way to install Storage adapters to get them through
; textmode setup. Do as little as possible and allow GUI mode setup to do the
; remaining work using the supplied inf.
;
; General format:
;
; [section]
; key = value1,value2,...
;
;
; The hash ('#') or semicolon (';') introduces a comment.
; Strings with embedded spaces, commas, or hashes should be double-quoted
;
; This section lists all disks in the disk set.
;
; <description> is a descriptive name for a disk, used when
; prompting for the disk
; <tagfile> is a file whose presence allows setup to recognize
; that the disk is inserted.
; <directory> is where the files are located on the disk.
;
[Disks]
d1 = "NVIDIA RAID DRIVER (SCSI)",\disk1,\
; This section lists the default selection for each 'required'
; hardware component. If a line is not present for a component,
; the default defaults to the first item in the [<component_name>]
; section (see below).
;
; <component_name> is one of computer, display, keyboard, mouse, scsi
; <id> is a unique <within the component> string to be associated
; with an option.
[Defaults]
scsi = RAIDCLASS
; This section lists the options available for a particular component.
;
; <id> is the unique string for the option
; <description> is a text string, presented to the user in a menu
; <key_name> gives the name of the key to be created for the component in
; HKEY_LOCAL_MACHINE\ControlSet001\Services
[scsi]
RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)"
BUSDRV = "NVIDIA NForce Storage Controller (required)"
; This section lists the files that should be copied if the user
; selects a particular component option.
;
; <file_type> is one of driver, port, class, dll, hal, inf, or detect.
; See below.
; <source_disk> identifies where the file is to be copied from, and must
; match en entry in the [Disks] section.
; <filename> is the name of the file. This will be appended to the
; directory specified for the disk in the [Disks] section to form the
; full path of the file on the disk.
; <driverkey> this is the name that will show under the services\driver key
; this should be the same name as the driver that is being installed.
[Files.scsi.RAIDCLASS]
driver = d1,nvraid.sys,RAIDCLASS
inf = d1,nvraid.inf
dll = d1,nvraidco.dll
catalog = d1,nvraid.cat
[Files.scsi.BUSDRV]
driver = d1,nvatabus.sys,BUSDRV
inf = d1, nvatabus.inf
dll = d1,idecoi.dll
catalog = d1, nvata.cat
; This section specifies values to be set in the registry for
; particular component options. Required values in the services\xxx
; key are created automatically -- use this section to specify additional
; keys to be created in services\xxx and values in services\xxx and
; services\xxx\yyy.
;
; This section must be filled out for storage controllers that
; are PNP adapters like PCI and ISA PNP adapters. Failure to do this
; can cause the driver to fail to load. Must also add the section
; [HardwareIds.scsi.ID] to identify the supported ID's.
;
; <value_name> specifies the value to be set within the key
; <value_type> is a string like REG_DWORD. See below.
; <value> specifies the actual value; its format depends on <value_type>
;
[Config.RAIDCLASS]
[Config.BUSDRV]
; A HardwareIds.scsi.Service section specifies the hardware IDs of
; the devices that a particular mass-storage driver supports.
;
; [HardwareIds.scsi.Service]
; id = "deviceID","service"
;
; HardwareIds.scsi.Service
; Service specifies the service to be installed.
;
; <deviceId > Specifies the device ID for a mass-storage device.
; <service > Specifies the service to be installed for the device.
;The following example excerpt shows a HardwareIds.scsi.Service section for a disk device:
;
[HardwareIds.scsi.RAIDCLASS]
id = "GenNvRaidDisk","nvraid"
id = "*_NVRAIDBUS","nvraid"
[HardwareIds.scsi.BUSDRV]
id = "PCI\VEN_10DE&DEV_008E", "nvatabus"
id = "PCI\VEN_10DE&DEV_0085", "nvatabus"
id = "PCI\VEN_10DE&DEV_00D5", "nvatabus"
id = "PCI\VEN_10DE&DEV_00EE", "nvatabus"
id = "PCI\VEN_10DE&DEV_00E3", "nvatabus"
id = "PCI\VEN_10DE&DEV_00E5", "nvatabus"
id = "PCI\VEN_10DE&DEV_0035", "nvatabus"
id = "PCI\VEN_10DE&DEV_0036", "nvatabus"
id = "PCI\VEN_10DE&DEV_003E", "nvatabus"
id = "PCI\VEN_10DE&DEV_0053", "nvatabus"
id = "PCI\VEN_10DE&DEV_0054", "nvatabus"
id = "PCI\VEN_10DE&DEV_0055", "nvatabus"
Last thing thanks so much for the cool guide!! When I saw that you could do this I freak because I reformat twice a week just because im a freak like that and this makes it so much easier. Thanks!!!! :)
My SATA/RAID is controlled by Nvidia nForce4 chipset. My mobo is the Asus A8N-SLI Deluxe if that helps to.
"THIS IS THE CODE I HAD TO MAKE AND PUT IN TO THE TXTSETUP.SIF"
[SourceDisksFiles]
nvraid.sys=1,,,,,,3_,4,1
nvatabus.sys=1,,,,,,3_,4,1
[HardwareIdsDatabase]
GenNvRaidDisk = "nvraid"
*_NVRAIDBUS = "nvraid"
PCI\VEN_10DE&DEV_008E = "nvatabus"
PCI\VEN_10DE&DEV_0085 = "nvatabus"
PCI\VEN_10DE&DEV_00D5 = "nvatabus"
PCI\VEN_10DE&DEV_00EE = "nvatabus"
PCI\VEN_10DE&DEV_00E3 = "nvatabus"
PCI\VEN_10DE&DEV_00E5 = "nvatabus"
PCI\VEN_10DE&DEV_0035 = "nvatabus"
PCI\VEN_10DE&DEV_0036 = "nvatabus"
PCI\VEN_10DE&DEV_003E = "nvatabus"
PCI\VEN_10DE&DEV_0053 = "nvatabus"
PCI\VEN_10DE&DEV_0054 = "nvatabus"
PCI\VEN_10DE&DEV_0055 = "nvatabus"
[SCSI.load]
RAIDCLASS = nvraid.sys, 4
BUSDRV = nvatabus.sys, 4
[scsi]
RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)"
BUSDRV = "NVIDIA NForce Storage Controller (required)"
HERE IS MY TXTSETUP.OEM for my raid drivers
;
; format for txtsetup.oem.
;
; Follow this format for non-PNP adapters ISA
;
; Follow the txtsetup.oem in initio for PNP adapters like PCI and ISAPNP
;
; Txtsetup.oem is a generic way to install Storage adapters to get them through
; textmode setup. Do as little as possible and allow GUI mode setup to do the
; remaining work using the supplied inf.
;
; General format:
;
; [section]
; key = value1,value2,...
;
;
; The hash ('#') or semicolon (';') introduces a comment.
; Strings with embedded spaces, commas, or hashes should be double-quoted
;
; This section lists all disks in the disk set.
;
; <description> is a descriptive name for a disk, used when
; prompting for the disk
; <tagfile> is a file whose presence allows setup to recognize
; that the disk is inserted.
; <directory> is where the files are located on the disk.
;
[Disks]
d1 = "NVIDIA RAID DRIVER (SCSI)",\disk1,\
; This section lists the default selection for each 'required'
; hardware component. If a line is not present for a component,
; the default defaults to the first item in the [<component_name>]
; section (see below).
;
; <component_name> is one of computer, display, keyboard, mouse, scsi
; <id> is a unique <within the component> string to be associated
; with an option.
[Defaults]
scsi = RAIDCLASS
; This section lists the options available for a particular component.
;
; <id> is the unique string for the option
; <description> is a text string, presented to the user in a menu
; <key_name> gives the name of the key to be created for the component in
; HKEY_LOCAL_MACHINE\ControlSet001\Services
[scsi]
RAIDCLASS = "NVIDIA RAID CLASS DRIVER (required)"
BUSDRV = "NVIDIA NForce Storage Controller (required)"
; This section lists the files that should be copied if the user
; selects a particular component option.
;
; <file_type> is one of driver, port, class, dll, hal, inf, or detect.
; See below.
; <source_disk> identifies where the file is to be copied from, and must
; match en entry in the [Disks] section.
; <filename> is the name of the file. This will be appended to the
; directory specified for the disk in the [Disks] section to form the
; full path of the file on the disk.
; <driverkey> this is the name that will show under the services\driver key
; this should be the same name as the driver that is being installed.
[Files.scsi.RAIDCLASS]
driver = d1,nvraid.sys,RAIDCLASS
inf = d1,nvraid.inf
dll = d1,nvraidco.dll
catalog = d1,nvraid.cat
[Files.scsi.BUSDRV]
driver = d1,nvatabus.sys,BUSDRV
inf = d1, nvatabus.inf
dll = d1,idecoi.dll
catalog = d1, nvata.cat
; This section specifies values to be set in the registry for
; particular component options. Required values in the services\xxx
; key are created automatically -- use this section to specify additional
; keys to be created in services\xxx and values in services\xxx and
; services\xxx\yyy.
;
; This section must be filled out for storage controllers that
; are PNP adapters like PCI and ISA PNP adapters. Failure to do this
; can cause the driver to fail to load. Must also add the section
; [HardwareIds.scsi.ID] to identify the supported ID's.
;
; <value_name> specifies the value to be set within the key
; <value_type> is a string like REG_DWORD. See below.
; <value> specifies the actual value; its format depends on <value_type>
;
[Config.RAIDCLASS]
[Config.BUSDRV]
; A HardwareIds.scsi.Service section specifies the hardware IDs of
; the devices that a particular mass-storage driver supports.
;
; [HardwareIds.scsi.Service]
; id = "deviceID","service"
;
; HardwareIds.scsi.Service
; Service specifies the service to be installed.
;
; <deviceId > Specifies the device ID for a mass-storage device.
; <service > Specifies the service to be installed for the device.
;The following example excerpt shows a HardwareIds.scsi.Service section for a disk device:
;
[HardwareIds.scsi.RAIDCLASS]
id = "GenNvRaidDisk","nvraid"
id = "*_NVRAIDBUS","nvraid"
[HardwareIds.scsi.BUSDRV]
id = "PCI\VEN_10DE&DEV_008E", "nvatabus"
id = "PCI\VEN_10DE&DEV_0085", "nvatabus"
id = "PCI\VEN_10DE&DEV_00D5", "nvatabus"
id = "PCI\VEN_10DE&DEV_00EE", "nvatabus"
id = "PCI\VEN_10DE&DEV_00E3", "nvatabus"
id = "PCI\VEN_10DE&DEV_00E5", "nvatabus"
id = "PCI\VEN_10DE&DEV_0035", "nvatabus"
id = "PCI\VEN_10DE&DEV_0036", "nvatabus"
id = "PCI\VEN_10DE&DEV_003E", "nvatabus"
id = "PCI\VEN_10DE&DEV_0053", "nvatabus"
id = "PCI\VEN_10DE&DEV_0054", "nvatabus"
id = "PCI\VEN_10DE&DEV_0055", "nvatabus"
Last thing thanks so much for the cool guide!! When I saw that you could do this I freak because I reformat twice a week just because im a freak like that and this makes it so much easier. Thanks!!!! :)