PDA

View Full Version : Water Colling Radiator Mod


ancient46
09-23-05, 12:47 PM
I am still working on the refrigerator angle to cool a PC and provide easy access to beverages at the computer. So if putting the PC in the fridge isn't practical, how about putting a water cooling radiator in one? A couple of holes, some more tubing, and some sealant and you have some really cold coolant. You could probably ditch the radiator's fans. A $64 mini fridge would probably be all you would need.

yahooadam
09-23-05, 01:16 PM
aye, you could do

however when you open the fridge door ure gonna fux the temps ....

plus u gonna have to drill through the insulation

joims
09-24-05, 07:20 AM
i was thinking, of doing something liek that:P well what you do its get a few metres of extra tubing, get a larger tube put one in the other and run it around bottom of your fridge area, put a barrier(cold sinks) along the bottom of your fridge door so when u open it it wont suck cold air out of the bottom half, and then just run the tubing et radiators thru that compartment, this will reduce loss of cool air when u open the door:)

if u dont undestand say and ill do a drawing for you

yahooadam
09-24-05, 03:16 PM
cut the door in half

screw the bottom half closed, then put something ontop on the bottom half of the door to seal off (doesnt need to be perfect) the bottom half from the top

then u can put a shelf in above that and beer away :)

also putting a rad in will help, due to better surface area