Is mixing possible?

[gokusimpson]

Would it be possible to mix a, for example, koolance GPU water block in a asetek water kit if they were both 1/2 inch?

[Skorp]

Sure. Use a Swiftech CPU block, Danger Den NB block, Polarflo GPU block... as long as it fits, it will work. Just ask yourself whether you want a high flow rate system, and get a block to suit. (This doesnt matter THAT much, but can shave off a few degrees.)

On that example, I uh, dont know any 1/2inch Asetek parts. Its all 10mm push-fits. And if you do intend to get Danger Den or something equally hardcore, be aware you have to supply your own jubile clips to clamp the pipes down.

[Avid6eek]

Also make sure everything is copper. If you mix Copper and Aluminum cooling components, electrolytic corrosion can occur that will destroy parts.

[omga14]

get the Swiftech Storm cpu block if you can afford it. better than the TDX according to alot of water cooling sites i've been visiting to put my system together.