phill9800
12-30-08, 04:08 PM
Well it came today and its been put together and taken apart already once today :) It'll be taken apart again tomorrow since I'll be testing my QX9650 in it :)
Anyways, here ya go :)
http://img396.imageshack.us/img396/320/newboard1pa4.jpg
http://img522.imageshack.us/img522/3284/overalshotxp3.jpg
http://img396.imageshack.us/img396/82/frontradrd0.jpg
http://img156.imageshack.us/img156/6153/cpublock1ij9.jpg
http://img522.imageshack.us/img522/826/caseside2op5.jpg
http://img156.imageshack.us/img156/6885/34viewsv4.jpg
What a mess!! :p It will be tidied up at some point :)
http://img156.imageshack.us/img156/4717/insidemessymc6.jpg
Nothing much has changed but with 3DGuy and me talking most days via MSN he's been bugging me to do this mod, so here ya go!! :p
Its basically a single CPU water loop, but with two Thermochill PA120.3 rads in it rather than one.
From what I remember with this E8500, its slightly lower, but I've not got any fans on the rear rad, so I dont know if that is making much of a difference or not. Something else for me to test I guess!! :p
Specs of the loop are:
Thermochill PA120.3 rads
D-Tek Fusion V1 block without the quad nozzle
Swiftech MCP655 pump
Micro Res
1/2 barbs
7/16 tubing
Blue Feser (nearly two litres of the stuff :p)
If I've missed anything, then it couldnt have been important enough!! :)
Anyways, here ya go :)
http://img396.imageshack.us/img396/320/newboard1pa4.jpg
http://img522.imageshack.us/img522/3284/overalshotxp3.jpg
http://img396.imageshack.us/img396/82/frontradrd0.jpg
http://img156.imageshack.us/img156/6153/cpublock1ij9.jpg
http://img522.imageshack.us/img522/826/caseside2op5.jpg
http://img156.imageshack.us/img156/6885/34viewsv4.jpg
What a mess!! :p It will be tidied up at some point :)
http://img156.imageshack.us/img156/4717/insidemessymc6.jpg
Nothing much has changed but with 3DGuy and me talking most days via MSN he's been bugging me to do this mod, so here ya go!! :p
Its basically a single CPU water loop, but with two Thermochill PA120.3 rads in it rather than one.
From what I remember with this E8500, its slightly lower, but I've not got any fans on the rear rad, so I dont know if that is making much of a difference or not. Something else for me to test I guess!! :p
Specs of the loop are:
Thermochill PA120.3 rads
D-Tek Fusion V1 block without the quad nozzle
Swiftech MCP655 pump
Micro Res
1/2 barbs
7/16 tubing
Blue Feser (nearly two litres of the stuff :p)
If I've missed anything, then it couldnt have been important enough!! :)